31
Oct 12

 

  Brake %
Front/Rear
Tire Stagger Wheel Offset Other Adjustments Other Problems
Push (B) Corner Entry Decrease Front Brake
Increase Rear Braking
Increase Front Move RF In Check Camber
Alignment & Toe Out
Shock Bent, A-Frame Binding
 
Push (C) Corner Entry Decrease Front Brake
Increase Rear Braking
Increase Front Move RF In or
Move RR Out
Check Front Tires for Hardness & Wear Brake Pedal
Balance Bar Binding
 
Push (D) Mid Corner Decrease Front Brake
Increase Rear Brake
Increase Front & Rear Move LR In or
Move RR Out
Move Axle
Dampner Shock to Left
Right Front Caliper Binding
Tires Old
 
Push (E) Mid Corner See other adjustments Increase Rear Move LR In or
Move RR Out
Raise RR Trailing Arm
Check Rear Alignment
Bent Axle Housing, RR toe in, LR toe out
 
Push (F) Corner Exit See other adjustments Increase Rear Move LR In or
Move RR Out
Decrease Torque Link or Upper Link Angle  
 
Push (G) Corner Exit See other adjustments Increase Rear Move LR In or
Move RR Out
Move Torque Link/Arm Right Broken RR Axle
 
Push (H) Corner Exit See other adjustments Increase Rear Move LR In or
Move RR Out
Decrease Rear Gear Ratio  
 
Loose (B&C) Corner Entry Increase Front Brake
Decrease Rear Brake
Decrease Front Move RF Out or
Move RR In
Increase Rear Gear Ration Rear Suspension Unloading
Linkage Loose
 
Loose (D) Mid Corner Increase Front Brake
Decrease Rear Brake
Decrease Rear Move RF Out or
Move RR In
Increase Throttle
Linkage Ratio
Too Much Trail in Rear, Bent Shock, Slider, etc
 
Loose (E) Mid Corner See other adjustments Decrease Rear Move RR In or
Move LR Out
Increase Torque Link or Upper Link Angle Suspension Bottoming Out, Tires Old, Torque Link Binding
 
Loose (F) Corner Exit See other adjustments Increase Rear Move RR In or
Move LR Out
Increase LR Trailing Arm Angle Bent Axle Housing, LR Toe In, RR Toe Out, Drive Line Bind
 
Loose (G) Corner Exit See other adjustments Decrease Rear See other adjustments Torque Link/Arm Spring too Soft Not Enough Pinion Angle, Tires Old